0603(1.6x0.8)-贴片保险丝

实物图片：

2024新澳门原料免费

Features产品特点：
• Compatible with leadfree solders and higher temperature profiles.
• High performance materials provide improved performance in elevated ambient temperature applications.
• Marked on top surface with code to allow amp rating identification without testing.
• Low profile for height sensitive applications.
• Flat top surface for pickand-place operations.
• Element covering material is resistant to industry standard cleaning operations.

Applications产品应用：
Secondary protection for space constrained applications:
• Cell phones
• Battery packs
• Digital cameras
• DVD players
• Hard disk drives.

Electrical Characteristics for Series
% of Ampere Rating		Opening Time at 25OC
100%	0.25-8A	4 hours, Minimum
200%	0.25-6A	5 sec., Maximum
250%	7-8A	5 sec., Maximum
300%	0.25-8A	0.2 sec., Maximum

Electrical Specifications by Item

AmpereRating (A)	Amp Code	Max Voltage Rating(V)	Interrupting Rating	Nominal Cold Resistance (Ohms)	Nominal Melting I2t (A2sec)	Nom Voltage Drop(mV)	Nom Power Dissipation (W)	Agency Approvals
AmpereRating (A)	Amp Code	Max Voltage Rating(V)	Interrupting Rating	Nominal Cold Resistance (Ohms)	Nominal Melting I2t (A2sec)	Nom Voltage Drop(mV)	Nom Power Dissipation (W)	UR	CSA
0.250	.250	125	50A @32V AC 50A@63VDC	0.5450	0.0030	158.56	0.0396	x	x
0.375	.375	125		0.2900	0.0053	128.03	0.0480	x	x
0.500	.500	125		0.1870	0.0087	115.71	0.0579	x	x
0.750	.750	125		0.1170	0.0171	107.33	0.0805	x	x
1.00	001.	125		0.0710	0.0212	89.10	0.0891	x	x
1.25	1.25	125		0.0530	0.0518	84.125	0.1054	x	x
1.50	01.5	125		0.0410	0.0766	81.14	0.1217	x	x
1.75	1.75	125	50A @32V AC/DC	0.01250	0.0903	78.75	0.1378	x	x
2.00	002.	125		0.0300	0.1103	78.22	0.1564	x	x
2.50	02.5	63		0.0220	0.1440	76.10	0.1903	x	x
3.00	003.	63		0.0180	0.2403	75.04	0.2251	x	x
3.50	03.5	63		0.0150	0.4306	74.25	0.2599	x	x
4.00	004.	63		0.0130	0.5760	73.72	0.2949	x	x
5.00	005.	63		0.0090	0.9000	72.71	0.3635	x	x
6.00	006	63		0.0085	1.3838	72.00	0.432	x	x
7.00	007	63		0.0080	1.5673	68.51	0.5123	x	x
8.00	008	63		0.0075	1.8321	65.24	0.5945	x	x

1. Measured at 10% of rated current, 25ºC. 2. Measured at rated voltage.

Temperature Rerating Curve

2024新澳门原料免费

Note:

1. Derating depicted in this curve is in addition to the standard derating of 25% for

continuous operation.

Example:For continuous operation at 70 degrees celsius, the fuse should be deratedas follows:

I = (0.75)(0.80)IRAT = (0.60)IRAT

2. The temperature derating curve represents the nominal conditions. For questions about temperature derating curve,

please consult our technical support for assistance.

Average Time Current Curves

2024新澳门原料免费

Soldering Parameters

Reflow Condition		Pb– Free assembly
Pre Heat	Temperature Min (Ts(min))	150°C
	Temperature Max (Ts(max))	200°C
	Time (Min to Max) (ts)	60 – 180 secs
Average ramp up rate (Liquidus Temp(TL) to peak		5°C/second max
TS(max) to TL-Ramp-up Rate		5°C/second max
Reflow	Temperature (TL) (Liquidus)	217°C
	Temperature (tL)	60 – 150 seconds
Peak Temperature (TP)		250+0/-5 °C
Time within 5°C of actual peak Temperature (tp)		20 – 40 seconds
Ramp-down Rate		5°C/second max
Time 25°C to peak Temperature (TP)		8 minutes Max.
Do not exceed		260°C
Wave Soldering		260°C, 10 seconds max.

2024新澳门原料免费

Product Characteristics

Materials	Body: Advanced High Temperature Substrate
	Terminations: 100% Tin over Nickel over Copper
	Element Cover Coat: Conformal Coating
Operating Temperature	– 55OC to 90OC. Consult temperature rerating curve chart. For operation above 90°C contact us
Humidity	MIL-STD-202F, Method 103B, Condition D
Thermal Shock	Withstands 5 cycles of – 55OC to 125OC
Vibration	Per MIL-STD-202F
Insulation Resistance (After Opening)	Greater than 10,000 ohms.
Resistance to Soldering Heat	MIL-STD-202G, Method 210F,Condition D

Dimensions

Part Marking System

Part Marking System
Amp Code	Marking Code
.250	D
.375	E
.500	F
.750	G
001.	B
1.25	J
01.5	H
1.75	L
002.	K
02.5	L
003.	O
03.5	R
004.	S
005.	T
006	U
007	V
008	W

2024新澳门原料免费（东莞市富源电子科技有限公司）成立于1998年，主要从事安规元器件生产和销售，通过10年的改革和努力现在的富宽源已经成为集生产和销售为一体的安规元器件总汇；富宽源将继续秉持品质第一、服务客户的原则不断为广大客户提供质优价廉的产品。我公司目前主要提供如下产品: 电流保险丝-CurrentFuse 玻璃管电流保险丝陶瓷管电流保险丝贴片电流保险丝电阻式保险丝微型电流保险丝高压电流保险丝直流电流保险丝交流电流保险丝 SMD-贴片式自恢复保险丝 AI-插件式自恢复保险丝保险丝座-Fuseholder ESTMF系列保险丝座 EDKFH系列保险丝座 SKPTF系列保险丝座 AUTO--汽车保险丝座 OPWOP系列保险丝座拉线盒式保险丝座保险丝夹&端子保险管座保险座大电流|高压保险座温度保险丝-Thermalcutoffs 方块形温度保险丝电阻式温度保险丝大电流温度保险丝陶瓷温度保险丝铁壳温度保险丝 SW.C温度保险丝 NEC温度保险丝艾默生温度保险丝内桥温度保险丝松下温度保险丝 AUPO温度保险丝温度开关/温控器-Thermalprotector 热保护器/可恢复温控器风筒式温控开关/温控器马达热保护器/温控器除霜除湿温控器/温控开关超低温温控开关/温控器微型温控开关/温控器温度开关/温控器-Thermalprotector 7AM/17AM温控器 KSD301系列温开关 KSD-01F插脚温开关 9700系列方块形温控开关 BR系列温控开关 SEKIST-22温控器压敏电阻-Varistors 压敏电阻氧化锌压敏阻器贴片压敏电阻 SMD压敏电阻插件型压敏电阻高能压敏电阻汽车保险丝Autofuse/carfuse 小号汽车插片保险丝FY-MIN 中号汽车插片保险丝FY-ATC 大号汽车插片保险丝FY-MAX 小号叉栓式汽车保险丝FY-UF 大号汽车叉栓式保险丝FY-MF 管状|柱状汽车保险丝其他型号汽车保险丝过载保护器-CIRCUITBREAKER AR1/AR2系列过载保护器 W系列过载保护器 88/88A系列过载保护器 90系列过载保护器 91/91L系列过载保护器 97/98/98H系列过载保护器带开关系列过载保护器热敏电阻-NTC/PTCThermistor 负温度系数热敏电阻陶瓷正温度系数热敏电阻高分子正温度系数热敏电阻温度传感器湿度传感器本公司将继续通过ISO9000质量管理体系的有效实施，使涉及企业生产经营的各个运作环节，均严谨有序，不断制造出质优价廉、适销对路的产品参与市场竞争，使企业长期保持较强的经营获利能力。同时我们将长期重视与行业知名企业合作，争取最大限度的代理权，以最优惠的价钱把产品销售给客户。

<< 上一页：1206(3.2x1.6)贴片保险丝 || 下一页：1032(3X10)方头贴片保险丝 >>